SDA-8300
8-channel Bridgeable Class D Amplifier
Documents & Downloads
Product Specifications
- Cooling
- Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (dBA SPL @ 1M)
- 47
- Required AC Mains (±10%)
- 100Vrms - 240Vrms ~50/60Hz
- Rated Output Power Into 8 Ohms
- 300W
- Rated Output Power Into 4 Ohms
- 300W
- Rated Output Power Into 2 Ohms
- 150W
- Bridged Output Power Into 8 Ohms
- 600W
- High Impedance
- 70-Volt & 100-Volt Capable
- Frequency Response (8Ω, 20Hz - 20kHz)
- ±0.25dB
- Analog Input Signal to Noise Ratio
- 104 dB
- BLU link Input Signal to Noise Ratio (A-Weighted)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Damping Factor (20Hz to100Hz)
- >1000
- Input Impedance (nominal balanced, unbalanced)
- 10kΩ, 5kΩ
- Maximum Input Level before Compression (Low Gain Mode)
- (+)20dB
- Load Impedance Stereo/Dual Mode
- 2Ω - 16Ω; 70Vrms and 100Vrms
- Load Impedance Bridge Mono
- 4Ω - 16Ω; 140Vrms and 200Vrms
- Width
- 19 in. (48.3 cm)
- Height
- 3.5 in. (8.9 cm)
- Depth
- 14.25 in. ( 35.63 cm)
- Weight
- 23.5lbs (10.66kg)
- Eight balanced line inputs
- 6-pin block connectors (Two channels per block connector)
- Eight speaker level outputs
- Terminal strip (accepts up to 10AWG wire)
- BLU link Input/Output
- RJ-45 (Category 5e)
- Ethernet
- RJ-45 (Category 5e)
- Programmable General Purpose Input/Output Ports
- " 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)"
- Power Connector
- 15A IEC
- Frequency Response
- +/-0.25db
- Signal-to-Noise Ratio
- >108db
- Total Harmonic Distortion (THD)
- <0.35%
- Power Requirements (+/-10%)
- 100VAC – 240VAC 50/60hz
SDA 8300
The SDA-8300 is a versatile 8-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 300W into 8 ohms and adjacent channel pairs can be bridged to deliver 600W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power LCR, surround, and height channel loudspeakers as well as in-wall subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.
Images & Videos
Need further assistance?
Call Us
Talk to a support agent
USA Contact: +1-888-691-4171
USA Phone Hours:
Monday - Friday
9am to 7pm EST
Closed Weekends and Holidays
E-mail Us
Contact us at any time!
IMPORTANT: Our agents respond to inquiries in the order in which they are received. Please expect delays during major holidays. Emails sent over the weekends will be reviewed during the next business day. Our agents cannot assist with product purchasing or product recommendations.